Fiber cabling solution for high-bandwidth,high-speed network
40Gb/100Gb Duplex Multimode 50/125 OM5 LSZH Fiber Patch Cable (SC/SC) Lime Green
Product Introduction
10G-Link fiber OM5 Wideband Multimode Duplex Fiber Optic Patch Cable (50/125) – SC to SC, high-speed Multi-mode Optical Fiber cables will unleash the power of your Local Area Network. SC UPC to SC UPC OM5 100 gigabit Fiber Optic Cable, Multi-Mode Duplex, Lime Green Color, made with YOFC Fiber, 50/125 core size. Also known as Wide Band Multimode Fiber (WB MMF). The effective modal bandwidth for OM5 fiber is specified at lower and upper wavelengths of 4700 MHz/km at 850nm and 2470 MHz/km at 953nm. Fully compatible with OM3 & OM4 cabling. The OM5 optical and mechanical attributes are compliant with OM4 50/125 μm specifications and include the additional specifications of effective modal bandwidth and attenuation at 953 nm. WB MMF is intended for operation using vertical-cavity-surface-emitting-laser (VCSEL) transceivers across the 846 to 953 nm wavelength range. Parallel transmission is the default multimode fiber variant for data rates greater than or equal to 40G. Supports SWDM (shortwave wavelength division multiplexing) technology which can reduce fiber counts in optical transmission.
OM5 cables can extend the reach from 100m with OM4 to 150m with OM5 with the same type of fiber optic transceivers. With ceramic ferrules and a 50/125 micron core, this cable is suitable for extremely high speed data transmissions such that you would find in 100 Gigabit Ethernet (100 Gb/s) networks. This 100 Gig fiber is OM5 Laser-Optimized. Each jumper cable is constructed of the finest components and shipped in individually sealed bags to ensure they arrive in perfect condition. Test results for the individual patch cable will be included in each bag. Color coded connectors assist with identification during the installation process to make installation easy for anyone.
Product Specification (Parameter) of Multimode OM5 duplex Fiber Patch Cable SCUPC/SCUPC
| Connector | SC to SC | Jacket OD | 2.0mm,3.0mm,1.6mm,2.4mm |
| Fiber Mode | 50/125μm OM5 | Jacket Color | Lime Green |
| Polish | UPC to UPC | Wavelength | 850/1300nm |
| Fiber Type | Duplex | Jacket Material | LSZH |
| Insertion loss | ≤0.3dB | Interchangeability | ≤0.2dB |
| Return loss | ≥35dB | Vibration | ≤0.2dB |
| Operating temperature | -40~75°C | Storage temperature | -45~85°C |
| Polarity | A(Tx) to B(Rx) | Fiber Grade | G.651 |
- Performance
Optical multimode 5 (OM5) compliant for 100-Gigabit Ethernet support - Core Diameter: 50/125 micron
- Insertion loss: typically 0.30 dB
- Return loss: >20dB
- Vertical Cavity Surface Emitting Laser (VCSEL) optimized
- Ceramic Ferrules for increased durability
- FOCIS-3 TIA/EIA-568-B.3 compliant
- Connectors: (LC/UPC) Small form factor with latch
- Used primarily for high speed data communications such as 100 Gigabit Ethernet
- Ultra Physical Contact (UPC) Polished Fiber
Product Application of OM5 Fiber Optic Patch Cables
OM5 is designed to support short wavelength division multiplexing (SWDM) applications in range of wavelengths from 850nm to 950 nm for transmitting 40Gb/s and 100Gb/s.
OM5 wideband multimode fiber optimized for multi-wavelengths transmission systems operating in the range of 850-950 nm, enabling optimal support of emerging Shortwave Wavelength Division Multiplexing (SWDM) applications that reduce parallel fiber count by at least a factor of four to allow continued use of just two fibers (rather than eight) for transmitting 40 Gb/s(up to 400m) and 100 Gb/s(up to 150m) and reduced fiber counts for higher speeds.
OM5 meets TIA-492AAAE and draft IEC 60793-2-10 A1a.4 requirements while completely backward compatible with existing OM4 networks and applications.
- Gigabit Ethernet
- Computer fiber networks
- Fiber test equipment
- Communication rooms
- Fiber Optic Communication System
- Optical fiber connected and transmitted equipment
- Defense combat readiness
- Active device termination
- Telecommunication networks
- Video and Multimedia
- Premise installations
- LAN(Local area networks)
- FTTH (Fiber to The Home) and FTTX applications
- CATV (Cable Television)
- FOS (fiber optic sensor)
Product Features of OM5 Fiber Optic Patch Cords
·Low insertion loss ≤0.3dB; ·High return loss,Multimode UPC≥35dB ·Good repeatability; ·Good interchange; ·Excellent environmental adaptability； ·Precise connector ·Excellent mechanical capability ·Fiber optic connector accord with ISO9001,ROHS,CE
Company and Products advantages:
1.The material of Ceramic Ferrule: Zirconium quality stable and easy for polishing
2.Good supply capacity(20K-30K pieces connectors each day)
3.Fast delivery time(1-3days)
4.Complied to ISO9001 quality system
5.100% testing before shipment
6.3D passed testing with report for option
7.All kinds of connector for option(SC,LC,FC,ST,MU,MTRJ,MPO/MTP,ODC,ODLC,SMA9 and so on)
Payment and Shipping Terms
Payment terms: MoneyGram ,Western Union,L/C,TT Shipping terms:By air, by sea,by express( DHL,Fedex,TNT,UPS,EMS)
